Posts Tagged ‘power’
Hardwire Power
Monday, May 16th, 2011
Protection and Discrimination in Uninterruptible Power Supplies
In uninterruptible power supply (UPS) installations, ‘discrimination’ is a term used to describe the co-ordination of protective devices within a supply circuit to ensure any load developing a fault (through overload, short-circuit or earth fault) is isolated and removed in the shortest possible time without disruption to remaining loads. It also ensures protection of supply conductors.
The specification is known as a ‘discrimination path’ and it is vital to a power continuity plan that a suitable path is made available for the uninterruptible power supply to protect both it and the loads it is powering. The most commonly used means of discrimination are RCDs (Residual Current Devices) or RCBOs (Residual Current Breaker with Over-current Protection).
It is important the protective devices are correct, and suitably rated, for the application for which they are chosen. Fuses and circuit breakers have different operating characteristics (speed of response) and will react differently when required to disconnect the ac supply when a fault occurs. Whichever method is employed, it is also vital any failed protective device is replaced on a like-for-like basis to maintain discrimination.
The difference in overload capability means that care has to be taken when specifying which type to use, especially within a UPS application, to prevent nuisance tripping at power up.
A type-D circuit breaker (motor-rated) can sustain higher overloads for longer periods and is recommended for use with loads with high in-rush currents, such as some types of uninterruptible power supply, motor machinery and transformer installations. A type-B device, which is for general-purpose use, responds much faster and is therefore more appropriate for Switch Mode Power Supply-type loads (computers and telecoms hardware, for example). It is also ideal for general electric circuits where it can be used to prevent nuisance tripping and disconnection. For most uninterruptible power supply installations a type-C is the preferred choice.
Within most installations, the protective devices used will comprise of a number of fuses, circuit breakers or RCBOs, connected in series between the ac supply and load. They are specified to operate in a co-ordinated manner so that the correct device trips when intended. This ensures discrimination under fault conditions. Circuit impedance must be low enough so that the necessary currents can be generated when a fault conditions occurs. Measurement for this is performed using an Earth Fault Loop Impedance Tester.
For uninterruptible power supply installations there are two types of connection method, each of which dictates the installation and testing required when connecting to the mains power supply and loads:
Plug-in Uninterruptible Power Supplies (up to 16A input): which can be installed by any competent person and not just a certified electrical engineer, if the mains power supply sockets are already available.
Hardwired Uninterruptible Power Supplies (above 16A input): connected to both the mains power supply and load by hardwired terminal connection points. Here it is mandatory that a certified electrical engineer performs the installation and issues a test certificate.
Fault conditions are not only annoying and disruptive but for 24/7 businesses requiring consistent power protection they can be devastating, bringing the whole operation to its knees for want of relatively simple discrimination paths in the electrical circuitry.
About the Author
Robin Koffler is the General Manager for Riello UPS Ltd the UK subsidiary of Riello UPS (RPS S.p.A) a leading European manufacturer of Uninterruptible Power Supplies and a co-author of The Power Protection Guide(ISBN 978-0-9554428-0-3)- available from Amazon.com
G37 Radar Detector Hardwire – with switched power source
|
|
Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger $1,089.00 Tripp Lite APS2012 PWRINV APS 2012 2000W 12VDC HWIRE… |
|
|
SeeAll 8 Oil Rubbed Bronze Finish Dual Sided Surround Light Wall Mount Makeup Mirror $58.88 8 inch diameter optical quality mirror. Dual Arm Wall Mount that Extends 14″ From Wall. Halo Lighted on both sides. This unique bronze finish lighted mirror features a 8″ non-fogging distortion-free glass mirror that eliminates unwanted shadowing. Elegantly crafted 8″ full 5X power magnification mirror on one side, true- view on the other. The graceful mirror head is mounted on an adjustable swing… |
|
|
Tripp Lite APS1250 1250W 12V DC to AC Inverter with Automatic Line-to-Battery 30-Amp Charger $387.00 12V DC, 120V AC – 120V AC – Continuous Power:1250W… |
|
|
Statpower Prosine 1800 24volt Hardwire Transfer $1,138.51 Provides 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC l… |
|
|
Charles 3200 Watt Tru-Sinewave Inverter $4,482.97 True Sinewave InverterCharles True Sinewave Power Inverters are the ideal solution to providing AC power to computers, test equipment, and other sensitive electronics from battery power. True sinewave output provides the “cleanest,” most-efficient power available. Power Inverters are a cleaner, safer, less-noisy alternative to supplying “on-the-go” power than are gas/diesel generators. Inverter/Ch… |
|
|
Charles 1500 Watt Tru-Value Sinewave Inverter $1,921.98 True Sinewave InverterCharles True Sinewave Power Inverters are the ideal solution to providing AC power to computers, test equipment, and other sensitive electronics from battery power. True sinewave output provides the “cleanest,” most-efficient power available. Power Inverters are a cleaner, safer, less-noisy alternative to supplying “on-the-go” power than are gas/diesel generators. Inverter/Ch… |
|
|
Samsung PN58C8000 58-Inch 1080p 3D Plasma HDTV (Black) $2,799.99 Samsung’s new C8000 Series plasma flat panelHDTVs represents our best design innovations and performance found in our 2010 line of Plasma TVs. First impressions begin with an elegantly styled brushed metal gray cabinet that measures a mere 1.5″ deep. Lighter in weight, more efficient than our previous designs, our feature innovations offer a more powerful Internet@TV with customizable access to In… |
|
|
Kidde KN-COSM-B Battery-Operated Combination Carbon Monoxide and Smoke Alarm with Talking Alarm $64.97 The Kidde KN-COSM-B Battery-Operated Carbon Monoxide and Smoke Alarm combines two important safety devices into a single unit. This alarm includes a voice warning system that announces “Fire, Carbon Monoxide, Low Battery, or Smart Hush Activation.” The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of r… |
|
|
Kidde KN-COSM-IB Hardwire Combination Carbon Monoxide and Smoke Alarm with Battery Backup and Voice Warning, Interconnectable $32.50 Untitled Document .caption { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: 20px; } table.callout { font-family: Verdana, Helvetica, Arial, serif; margin: 10px; width: 250; } td.callout3-c26 { height: 100 percent; background: url(‘http://g-ecx.images-amazon.com/images/G/01/th/detail-p… |
|
|
First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup $29.99 The BRK hardwire combination smoke and carbon monoxide alarm detects two hazards with one simple unit. Carbon monoxide (CO) is a colorless, odorless, deadly gas. It can be emitted by sources including gas or oil furnaces, gas clothes dryers, water heaters, fireplaces, wood stoves, charcoal grills, gas ranges, and space heaters. A clogged chimney, improper venting, and attached garages can also cau… |
